The ever-increasing demand for energy worldwide is hurting our environment, especially global warming. This is due to the significant use of fossil fuels. Faced with this situation, research and innovation actions are directed toward reducing these emissions by various scientific solutions including the multi-objective optimization of thermal machines. Among these thermal machines, one can mention the micro-gas turbines. Indeed, internal and external heat transfers are made in these machines because of their small size. These heat transfers contribute to degrading their performances in particular their environmental discharges that increase brutally. The present study aims at applying the eco-design methodology to these machines to evaluate their actual performances according to the heat transfers and to improve them. For this study, a thermodynamic model coupled with an environmental and economic model that describes the global behavior of micro-gas turbines has been performed. This model, operating in two modes adiabatic and polytropic to appreciate the deviations, gives good results that agree with those of the literature. The model was then optimized in a multi-objective way by Genetic Algorithms (NSGA IIb) giving a set of Pareto optimal solutions. The ideal solutions’ selection was done by applying the TOPSIS multi-criteria decision-making technique and gave the following results in polytropic operation: net power: 858.4 kW; global warming potential: 0.9561 kg CO2/kWh and the estimated production cost of US$4256/hr. This ideal solution was subsequently analyzed by OpenLCA software to evaluate the whole environmental impacts characterized mainly by HTP (kg C6H6/kWh): 0.356; EP (kg PO43-/kWh): 0.525; PCOP (kg C2H4/kWh): 0.295; AP (kg SO2/kWh): 0.356.
| Published in | American Journal of Environmental Protection (Volume 12, Issue 1) |
| DOI | 10.11648/j.ajep.20231201.11 |
| Page(s) | 1-10 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2023. Published by Science Publishing Group |
Eco-design, Micro-Gas Turbines, Multiobjective Optimization, Genetic Algorithm
| [1] | Adama Ouattara L. Pibouleau, C. Azzaro-Pantel, S. Domenech (2010). Eco-Efficiency Analysis for Chemical Process Design, 20th European Symposium on Computer Aided Process Engineering – ESCAPE20 S. Pierucci and G. Buzzi Ferraris (Editors), Elsevier B. V. All rights reserved. |
| [2] | Guillaume ALIX (2008). Diesel engine comparison concepts with a view to their hybridization: CO2 emissions balance according to vehicle use, p. 20. |
| [3] | Biofuels Research Advisory Council of the European Commission (2006). Biofuels in the European Union. - A vision for 2030 and beyond, p. 31. |
| [4] | S. Sidibé, J. Blin (2009). Pure vegetable oils as fuel in the diesel engine, state of knowledge, 2iE Scientific Day. |
| [5] | A. Diango, C. Périlhon, Danho, E. Descombes, Georges. (2014). Analytical study of the energy efficiency of mini thermal turbomachines in non-adiabatic operation. |
| [6] | Y. Gong, B. T. Sirakov, C. Tan. (2004). Aerothermodynamics of micro-turbo-machinery. Proceedings of ASME Turbo Expo. 14-17, GT2004-53877, pp. 1-8. |
| [7] | Ribaud Y. (2004). Overall Thermodynamics model of an Ultra Microturbine, Journal of Thermal Science. Vol. 13, 4, pp. 297-301. |
| [8] | D. Bonh, T. Heuer, K. Kusterer (2003). Conjugate flow and heat transfer investigation of a turbocharger, part 1: numerical results, proceeding of turbo expo. Paper GT2003-38445, pp. 1-8. |
| [9] | D. Verstraete, Z. Alsaihi, R. A. Van Den Braembussche (2007). Numerical Study of the Heat Transfer in Micro Gas Turbines, Journal of Turbomachinery. ASME, Octobre, Vol. 129, pp. 835-841. |
| [10] | A. Diango, C. Périlhon, Danho, E. Descombes, Georges (2011). Influence of Heat Transfer on Gas Turbine Performance. 10.5772/20196, |
| [11] | Victor-Eduard CENUMA (2004). Contribution to the improvement of the thermodynamic coupling between the gas turbine plant and the steam turbine plant in combined gas/steam cycle power plants, pp 29-35. |
| [12] | H. Barzegar Avval, P. Ahmad, A. R. Ghaffarizadeh, M. H. Saidi (2011). Thermo-economic-environmental multiobjective optimization of a gas turbine power plant with preheater using evolutionary algorithm, Volume 35, Issue 5, Pages 389-403, https://doi.org/10.1002/er.1696. |
| [13] | UELI Honegger (2004). Gas turbine combustion modeling for a parametric emissions monitoring system, B. E. University of Applied Science of Rapperswil, Switzerland. |
| [14] | EPSTEIN A. (2004). Millimeter-Scale, Micro-Electro-Mechanical Systems Gas Turbine, Journal of Engineering for Gas Turbines. ASME, Vol. 126, pp. 205-226. |
| [15] | K. A. B. Pathirathna (2013). Gas turbine thermodynamic and performance analysis methods using available catalog data, Thesis in Sustainable Energy Engineering. |
| [16] | José Luz Silveira, Celso Eduardo Tuna (2003) Thermoeconomic analysis method for optimization of combined heat and power systems Part I, Progress in Energy and Combustion Science 29 (6): 479-485, DOI: 10.1016/S0360-1285(03)00041-8. |
| [17] | Dries Verstraete, Carlos Bowkett (2014). Impact of heat transfer on the performance of micro gas turbines, Applied Energy 138, DOI: 10.1016/j.apenergy.2014.10.075. |
| [18] | Samson Endale Turie (2011). Gas Turbine Plant Modeling for Dynamic Simulation, Thesis in industrial engineering and management. |
| [19] | Vaibhav Prakash (2017). Parametric Emission Prediction Model in Gas Turbines with Exhaust Gas Recirculation. |
| [20] | J. LEBRUN, Vincent LEMORT (2007). Faculty of Applied Sciences, Aerospace and Mechanics Department, Machines and Thermal Systems. |
| [21] | A. H. Lefebvre, D. R. Ballal (2010). Gas Turbine Combustion: Alternative Fuels and Emissions, 3rd ed. CRC Press, Florida. |
| [22] | P. E. Røkke (2006). Environmental use of Natural Gas in a Gas Turbine, Ph.D. thesis, The Norwegian University of Science and Technology. |
| [23] | Muhammad Akasha Hashim, Amir Khalid, Hamidon Salleh, Norshuhaila Mohamed Sunar, Effects of Fuel and Nozzle Characteristics on Micro Gas Turbine System: A Review, Materials Science and Engineering 226. |
| [24] | Yazdi Behdad Ahrar, Ehyaei Mehdi Ali, Ahmadi Abolfazl (2017). Optimization of Micro Combined Heat and Power Gas Turbine by Genetic Algorithm, Thermal Science: Vol. 19, No. 1, pp. 207-218, (2015). |
| [25] | A. Lazzaretto, A. Toffolo (2004). Energy, economy, and environment as objectives in multi-criterion optimization of thermal systems design, Energy, Volume 29, Issue 8, Pages 1139-1157, ISSN 0360-5442. https://doi.org/10.1016/j.energy.2004.02.022. |
| [26] | IChemE (2003). The Sustainability Metrics: sustainable development progress metrics recommended for the use in process industries, Institution of Chemical Engineers, http://www.icheme.org/sustainability. |
| [27] | A. Ouattara, L. Pibouleau, C. Azzaro-Pantel, S. Domenech (2013). Economic and environmental impacts of the energy source for the utility production system in the HDA process, Energy Conversion and Management 74 pp 129–139, http://dx.doi.org/10.1016/j.enconman.2013.03.037. |
| [28] | Jean Dipama (2010). Energy systems multi-objective optimization, Physics Engineering Department, PhD thesis, pp 32-40. |
| [29] | Gomez Adrien and Pibouleau, Luc and Azzaro-Pantel, Catherine and Domenech, Serge and Latgé, Christian and Haubensack, David (2010). Multiobjective genetic algorithm strategies for electricity production from generation IV nuclear technology. Energy Conversion and Management, vol. 51 (n° 4). pp. 859-871. ISSN 0196-8904. |
| [30] | Thomas Vallée, Murat Yıldızoglu (2001). Genetic algorithms presentation and their applications in economics, Censive du Tertre Road F-44312 NANTES. |
| [31] | S. Sanaye, Ziabasharhagh M. Ghazinejad M. (2009). Optimal design of gas turbine CHP plant. International Journal of Energy Research; 33 (8): 766–777. |
| [32] | A. Saltelli, S. Tarantola (2002). On the relative importance of input factors in mathematical models: safety assessment for nuclear waste disposal. Journal of the American Statistical Association, 97 (459): 702-709. |
| [33] | T. Turanyi (1990). Sensitivity analysis of the complex kinetic system, tools, and applications. Journal of Mathematical Chemistry, 5: 203_248. |
| [34] | Jacques Goupy (2013). Introduction to Design of Experiments with Applications, 5th Edition. |
| [35] | François Husson, Jérôme Pagès (2005). General statistics for users, Rennes University Press (PUR). |
| [36] | G. Chauvat, J. Preau (2002). Statisttiques descriptives, Ed Armand Colin Editeur. |
| [37] | Frédéric Bertrand (2012). Complete factorial designs, fractional designs: Factors case with two modalities, IRMA, Strasbourg University, France. |
| [38] | Dorra Ayadi (2010). Reliability Multicriteria optimization: the goal-programming application model with satisfaction functions in the gas processing industry. Reliability multicriteria optimization: the goal-programming application model with satisfaction functions in the gas processing industry. |
| [39] | Daniel VANDERPOOTEN (2008). Multicriteria decision support, concepts, methods and perspectives, LAMSADE Paris Dauphine University. |
| [40] | Marion PRINÇAUD (2011). An environmental decision support tool development based on Life Cycle Assessment integrated into process design. |
| [41] | Hichem Hassaine (2015). Eco-manufacturing modeling, simulation and optimization, PhD thesis, pp 40-62. |
| [42] | MÉNDEZ M. GALVÁN B., SALAZAR D. GREINER D. (2006). «Multiple-Objective Genetic Algorithm Using the Multiple Criteria Decision-Making Method TOPSIS», MOPGP’06: 7th Int. Conf. on Multi-Objective Programming and Goal Programming. |
| [43] | A. Laurent, Ioannis Bakas, Julie Clavreul, Anna Bernstad, Monia Niro, Emmanuel Gentil 6 Michael Z Hauschild, Thomas H Christensen (2014). Review of LCA studies of solid waste management systems – Part I: lessons learned and perspectives Waste Manag. |
| [44] | D. Maga, MarkusHiebel, NilsThonemann. (2019). Life cycle assessment of recycling options for polylactic acid Resour. Conserv. |
| [45] | H. H. Khoo (2019). LCA of plastic waste recovery into recycled materials, energy, and fuels in Singapore Resour. Conserv. |
| [46] | A. Demetrious Enda Crossin (2019). Life cycle assessment of the paper and plastic packaging waste in landfill, incineration, and gasification-pyrolysis J. Mater. Cycles Waste Manag. |
| [47] | Speck, Ricky et al. (2015). Life Cycle Assessment Software: Selection Can Impact Results.” Journal of Industrial Ecology 20, 18–28. Web. Andreas Ciroth, ICT for Environment in Life Cycle Applications openLCA. New open-source software for Life Cycle Assessment. |
| [48] | Rahul Jain, Priyam Nayak, Rahul A. S, Pravin Dalve, Kannan M. Moudgalya, P. R. Naren, Daniel Wagner, Peter Fritzson. (2019). Implementation of a Property Database and Thermodynamic Calculations in Open Modelica for Chemical Process Simulation, Industrial & Engineering Chemistry Research 58 (18), 7551-7560, DOI: 10.1021/acs.iecr.8b05147. |
| [49] | Ricardo Moreira dos Santos, Alexandre Szklo, André Lucena, Matheus Poggio (2022). Evaluating strategies for monetizing natural gas liquids from processing plants – Liquid fuels versus petrochemicals, Journal of Natural Gas Science and Engineering, Volume 99, 104413, ISSN 1875-5100, https://doi.org/10.1016/j.jngse.2022.104413. |
APA Style
Koffi N’guessan Marcellin, Adama Ouattara, Saraka Kouassi Joseph. (2023). Multiobjective Optimization of Micro-Gas Turbines Environmental Polluting Emissions Due to their Internal and External Thermal Losses. American Journal of Environmental Protection, 12(1), 1-10. https://doi.org/10.11648/j.ajep.20231201.11
ACS Style
Koffi N’guessan Marcellin; Adama Ouattara; Saraka Kouassi Joseph. Multiobjective Optimization of Micro-Gas Turbines Environmental Polluting Emissions Due to their Internal and External Thermal Losses. Am. J. Environ. Prot. 2023, 12(1), 1-10. doi: 10.11648/j.ajep.20231201.11
AMA Style
Koffi N’guessan Marcellin, Adama Ouattara, Saraka Kouassi Joseph. Multiobjective Optimization of Micro-Gas Turbines Environmental Polluting Emissions Due to their Internal and External Thermal Losses. Am J Environ Prot. 2023;12(1):1-10. doi: 10.11648/j.ajep.20231201.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajep.20231201.11,
author = {Koffi N’guessan Marcellin and Adama Ouattara and Saraka Kouassi Joseph},
title = {Multiobjective Optimization of Micro-Gas Turbines Environmental Polluting Emissions Due to their Internal and External Thermal Losses},
journal = {American Journal of Environmental Protection},
volume = {12},
number = {1},
pages = {1-10},
doi = {10.11648/j.ajep.20231201.11},
url = {https://doi.org/10.11648/j.ajep.20231201.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajep.20231201.11},
abstract = {The ever-increasing demand for energy worldwide is hurting our environment, especially global warming. This is due to the significant use of fossil fuels. Faced with this situation, research and innovation actions are directed toward reducing these emissions by various scientific solutions including the multi-objective optimization of thermal machines. Among these thermal machines, one can mention the micro-gas turbines. Indeed, internal and external heat transfers are made in these machines because of their small size. These heat transfers contribute to degrading their performances in particular their environmental discharges that increase brutally. The present study aims at applying the eco-design methodology to these machines to evaluate their actual performances according to the heat transfers and to improve them. For this study, a thermodynamic model coupled with an environmental and economic model that describes the global behavior of micro-gas turbines has been performed. This model, operating in two modes adiabatic and polytropic to appreciate the deviations, gives good results that agree with those of the literature. The model was then optimized in a multi-objective way by Genetic Algorithms (NSGA IIb) giving a set of Pareto optimal solutions. The ideal solutions’ selection was done by applying the TOPSIS multi-criteria decision-making technique and gave the following results in polytropic operation: net power: 858.4 kW; global warming potential: 0.9561 kg CO2/kWh and the estimated production cost of US$4256/hr. This ideal solution was subsequently analyzed by OpenLCA software to evaluate the whole environmental impacts characterized mainly by HTP (kg C6H6/kWh): 0.356; EP (kg PO43-/kWh): 0.525; PCOP (kg C2H4/kWh): 0.295; AP (kg SO2/kWh): 0.356.},
year = {2023}
}
TY - JOUR T1 - Multiobjective Optimization of Micro-Gas Turbines Environmental Polluting Emissions Due to their Internal and External Thermal Losses AU - Koffi N’guessan Marcellin AU - Adama Ouattara AU - Saraka Kouassi Joseph Y1 - 2023/01/10 PY - 2023 N1 - https://doi.org/10.11648/j.ajep.20231201.11 DO - 10.11648/j.ajep.20231201.11 T2 - American Journal of Environmental Protection JF - American Journal of Environmental Protection JO - American Journal of Environmental Protection SP - 1 EP - 10 PB - Science Publishing Group SN - 2328-5699 UR - https://doi.org/10.11648/j.ajep.20231201.11 AB - The ever-increasing demand for energy worldwide is hurting our environment, especially global warming. This is due to the significant use of fossil fuels. Faced with this situation, research and innovation actions are directed toward reducing these emissions by various scientific solutions including the multi-objective optimization of thermal machines. Among these thermal machines, one can mention the micro-gas turbines. Indeed, internal and external heat transfers are made in these machines because of their small size. These heat transfers contribute to degrading their performances in particular their environmental discharges that increase brutally. The present study aims at applying the eco-design methodology to these machines to evaluate their actual performances according to the heat transfers and to improve them. For this study, a thermodynamic model coupled with an environmental and economic model that describes the global behavior of micro-gas turbines has been performed. This model, operating in two modes adiabatic and polytropic to appreciate the deviations, gives good results that agree with those of the literature. The model was then optimized in a multi-objective way by Genetic Algorithms (NSGA IIb) giving a set of Pareto optimal solutions. The ideal solutions’ selection was done by applying the TOPSIS multi-criteria decision-making technique and gave the following results in polytropic operation: net power: 858.4 kW; global warming potential: 0.9561 kg CO2/kWh and the estimated production cost of US$4256/hr. This ideal solution was subsequently analyzed by OpenLCA software to evaluate the whole environmental impacts characterized mainly by HTP (kg C6H6/kWh): 0.356; EP (kg PO43-/kWh): 0.525; PCOP (kg C2H4/kWh): 0.295; AP (kg SO2/kWh): 0.356. VL - 12 IS - 1 ER -
Email: